null
How to Display Images on a TFT LCD

How to Display Images on a TFT LCD

TFT LCDs, or thin-film transistor liquid-crystal displays, are a type of LCD commonly used in various devices, including smartphones, tablets, and TVs.  TFT LCDs are known for their high image quality, fast response times, and low power consumption.

One of the most commonly used applications of TFT LCDs is displaying images. This makes them ideal for various projects, such as digital photo frames, digital signage, and DIY projects. In this article, we will show you how to display images on a TFT LCD using an SD card and the Arduino Due.



Things You Will Need


Pinout Table

Complete pinout description and connections for the connection between the TFT LCD, SD card breakout board, and the Arduino Due.

TFT LCD and Arduino Due Pinout

LCD Pin Símbolo Connection
1 GND GND
2 NC NC
3 NC NC
4 NC NC
5 NC NC
6 SDO NC
7 VDD 3.3V
8 VDDI 3.3V
9 SDA NC
10 CSX GND
11 DCX Arduino Pin 2
12 WRX Arduino Pin 11
13 RDX 3.3V
14 DB0 NC
15 DB1 NC
16 DB2 NC
17 DB3 NC
18 DB4 NC
19 DB5 NC
20 DB6 NC
21 DB7 NC
22 DB8 Arduino Pin 33
23 DB9 Arduino Pin 34
24 DB10 Arduino Pin 35
25 DB11 Arduino Pin 36
26 DB12 Arduino Pin 37
27 DB13 Arduino Pin 38
28 DB14 Arduino Pin 39
29 DB15 Arduino Pin 40
30 RESX 3.3V
31 IM0 3.3V
32 IM2 GND
33 GND GND
34 LED-K1 GND
35 LED-K2 GND
36 LED-K3 GND
37 LED-K4 GND
38 LED-A 3.3V
39 GND GND
40 TE NC

SD Card Breakout Board Pinout:

SD Breakout Pin Connection
GND Arduino Due SPI Pin 6
MISO Arduino Due SPI Pin 1
SCK Arduino Due SPI Pin 3
MOSI Arduino Due SPI Pin 4
CS Arduino Due Pin 49
5V Arduino Due SPI Pin 2
3.3V NC

Wiring Diagram

The wiring diagram below shows how to connect the TFT LCD and SD card to the Arduino Due for displaying graphics and accessing the SD card.

Wiring diagram between a TFT LCD, SD card, and Arduino Due to display an image on the screen Expand Icon Click to expand
Wiring diagram between a TFT LCD, SD card, and Arduino Due to display an image on the screen.

Convert Image to Text File & Save to SD Card

Most LCDs do not directly interpret standard image formats like JPEG or PNG. Instead, they use raw pixel data, often represented in hexadecimal format. We first need to convert the image to an image data array by downloading the  LCD Image Converter software and following these steps:

  1. Open LCD Image Converter software.
  2. Go to Image -> Import and open the image you want to display on the LCD. Image file resolution must match the resolution of the LCD.
  3. Go to Options -> Conversion and ensure the “Color R5G6B5” preset is selected.
  4. Click on the “Image” tab. In the “Common” section, uncheck “Split to rows” and set block size to "8-bit."
  5. At the bottom-left of the window, click “Show Preview.”
  6. Copy and paste the hex values into a text editor and save the file as “image1.txt.”
  7. Transfer the text file to an SD card and insert the SD card into the breakout board.

Copy Example Code to Arduino IDE

Open the Arduino IDE and start a new Sketch. Clear any pre-existing code, then copy and paste the code provided below.

/*
/Newhaven Display invests time and resources providing this open source code,
/Please support Newhaven Display by purchasing products from Newhaven Display! 
*
* This code is provided as an example only and without any warranty by Newhaven Display. 
* Newhaven Display accepts no responsibility for any issues resulting from its use.
* The developer on the final application incorporating any parts of this 
* sample code is responsible for ensuring its safe and correct operation
* and for any consequences resulting from its use. 
* See the GNU General Public License for more details.
*/
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
/****************************************************
*         PINOUT: Arduino Due -> 2.4" TFT           *
*****************************************************/
#define    RS   2     
#define    WR  11
const char slave = 0x38;
const int ChipSelect = 49;
int image_value = 0;
File myFile;
/****************************************************
*                 Function Commands                  *
******************************************************/
void comm_out(unsigned char c)
{
  PIOB -> PIO_CODR = 1 << 25;   //RS LOW
  REG_PIOC_ODSR = c << 1; 
  PIOD -> PIO_CODR = 1 << 7;    //WR LOW
  PIOD -> PIO_SODR = 1 << 7;    //WR HIGH
}
void data_out(unsigned char d)
{
  PIOB -> PIO_SODR = 1 << 25;   //RS HIGH
  REG_PIOC_ODSR = d << 1;
  PIOD -> PIO_CODR = 1 << 7;    //WR LOW
  PIOD -> PIO_SODR = 1 << 7;    //WR HIGH
}
//-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
//  Window Set Function
//-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
void window_set(unsigned s_x, unsigned e_x, unsigned s_y, unsigned e_y)
{
  comm_out(0x2a);    //SET column address
  data_out((s_x)>>8);     //SET start column address
  data_out(s_x);
  data_out((e_x)>>8);     //SET end column address
  data_out(e_x);
  comm_out(0x2b);    //SET page address
  data_out((s_y)>>8);     //SET start page address
  data_out(s_y);
  data_out((e_y)>>8);     //SET end page address
  data_out(e_y);
}
/****************************************************
*         Initialization and Setup Routine          *
*****************************************************/
void setup()
{
  delay(100);
  pinMode(RS,OUTPUT);  
  pinMode(WR,OUTPUT);  
  PIOC->PIO_OER = 0xFFFFFFFF;
  digitalWrite(WR, LOW);
  comm_out(0x28);  //display off
  comm_out(0x11);  //exit SLEEP mode
  delay(100);
  comm_out(0x36);  //MADCTL: memory data access control
  data_out(0x10);  //changing from 0x88
  comm_out(0x21);  //display inversion
  comm_out(0x3A);  //COLMOD: Interface Pixel format  *** 65K-colors in 16bit/pixel (5-6-5) format when using 16-bit interface to allow 1-byte per pixel
  data_out(0x55);  //0x55 = 65k   //0x65 = 262k
  comm_out(0xB2);  //PORCTRK: Porch setting
  data_out(0x0C);
  data_out(0x0C);
  data_out(0x00);
  data_out(0x33);
  data_out(0x33);
  comm_out(0xB7);  //GCTRL: Gate Control
  data_out(0x35);
  comm_out(0xBB);  //VCOMS: VCOM setting
  data_out(0x2B);
  comm_out(0xC0);  //LCMCTRL: LCM Control
  data_out(0x2C);
  comm_out(0xC2);  //VDVVRHEN: VDV and VRH Command Enable
  data_out(0x01);
  data_out(0xFF);
  comm_out(0xC3);  //VRHS: VRH Set
  data_out(0x11);
  comm_out(0xC4);  //VDVS: VDV Set
  data_out(0x20);
  comm_out(0xC6);  //FRCTRL2: Frame Rate control in normal mode
  data_out(0x0F);
  comm_out(0xD0);  //PWCTRL1: Power Control 1
  data_out(0xA4);
  data_out(0xA1);
  comm_out(0xE0);  //PVGAMCTRL: Positive Voltage Gamma control  
  data_out(0xD0);
  data_out(0x00);
  data_out(0x05);
  data_out(0x0E);
  data_out(0x15);
  data_out(0x0D);
  data_out(0x37);
  data_out(0x43);
  data_out(0x47);
  data_out(0x09);
  data_out(0x15);
  data_out(0x12);
  data_out(0x16);
  data_out(0x19);
  comm_out(0xE1);  //NVGAMCTRL: Negative Voltage Gamma control  
  data_out(0xD0);
  data_out(0x00);
  data_out(0x05);
  data_out(0x0D);
  data_out(0x0C);
  data_out(0x06);
  data_out(0x2D);
  data_out(0x44);
  data_out(0x40);
  data_out(0x0E);
  data_out(0x1C);
  data_out(0x18);
  data_out(0x16);
  data_out(0x19);
  comm_out(0x2A);  //X address set
  data_out(0x00);
  data_out(0x00);
  data_out(0x00);
  data_out(0xEF);
  comm_out(0x2B);  //Y address set
  data_out(0x00);
  data_out(0x00);
  data_out(0x01);
  data_out(0x3F);
  delay(10);
  comm_out(0x29);  //display ON
  delay(10);
  SD.begin(ChipSelect);
}
/*****************************************************
*           Loop Function, to run repeatedly         *
*****************************************************/
void loop()
{ 
  SD_Card_Image(1);
  delay(5000);
  //SD_Card_Image(2);
  //delay(5000);
  //SD_Card_Image(3);
  //delay(5000);
  //SD_Card_Image(4);
  //delay(5000);
  //SD_Card_Image(5);
  //delay(5000);
}
void SD_Card_Image(unsigned char image){       /*The images used are in a textfile*/
    unsigned char dummy;
    unsigned int incr =0;
    switch (image){
      case 1: 
        image_value=1;
        myFile = SD.open("image1.txt");  
        break;
      case 2:
        image_value=2;
        myFile =SD.open("image2.txt");    
        break;    
      case 3:
        image_value=3;
        myFile = SD.open("image3.txt");   
        break;     
      case 4:
        image_value=4;
        myFile = SD.open("image4.txt");   
        break; 
      case 5:
        image_value=5;
        myFile = SD.open("image5.txt");   
        break;           
    }
  comm_out(0x2A);  /*X address set*/
  data_out(0x00);
  data_out(0x00);
  data_out(0x00);
  data_out(0xEF);
  comm_out(0x2B);  /*Y address set*/
  data_out(0x00);
  data_out(0x00);
  data_out(0x01);
  data_out(0x3F);      
  comm_out(0x2C);  /*command to begin writing to frame memory     */
  byte  data_in1,data_in2,data_in,data_out_value;
  uint8_t data_send;
  char data_conv[1]={0};
  int i;  
  int track ;
  while (myFile.available()){ /*convert the input char data to integers*/
        dummy = myFile.read(); 
        dummy = myFile.read(); 
        data_in1 = myFile.read(); 
        data_in2 = myFile.read(); 
        data_in=data_in1;
        if(data_in >=48 && data_in<=57){    /*if values are in range of 0-9 values*/
            data_in1 = data_in-48;
            track=1;
          }
          if(data_in <=102 && data_in>=97){ /*if values are in range of a-f*/
            data_in1 = data_in - 87; 
            track=1;
          }
          if( data_in ==32/*Space*/ || data_in==44 /*comma*/ || data_in == 120 /*x*/){
            dummy =data_in;
            track=0;
            data_in1 =0;
            data_in2 =0;
          }      
        data_in=data_in2;
        if(data_in >=48 && data_in<=57){   /*if values are in range of 0-9 values*/
            data_in2 = data_in-48;
            track=1;
          }
          if(data_in <=102 && data_in>=97){/*if values are in range of a-f*/
            data_in2 = data_in - 87; 
            track=1;
          }
          if( data_in ==32/*Space*/ || data_in==44 /*comma*/ || data_in == 120 /*x*/){/*skip dummy data*/
            dummy =data_in;
            track=0;
            data_in1 =0;
            data_in2 =0;
          }              
        dummy = myFile.read(); 
        dummy = myFile.read();  
        data_out_value = data_in1<<4 | data_in2;  
        data_out(data_out_value);
      }
      myFile.close();   
}
	

Upload the Code to Arduino

The final step is to upload the code to the Arduino IDE.

  1. Connect the Arduino to your PC with the USB-B cable.
  2. In the Arduino IDE, select the board and port.
  3. Click the “Upload” button to program the Arduino with your code.

Once the code is successfully uploaded, your image should appear on the LCD screen.

Wiring diagram between an TFT LCD, SD card, and Arduino Due to display an image on the screen
A Newhaven TFT LCD screen displaying an image sourced from an SD card, with the image processing and rendering handled by an Arduino Due.

Conclusão

Whether you are learning, prototyping, or want to have fun playing around with electronics, this tutorial outlines the basics of reading hex image data from an SD card and displaying it on a TFT LCD. This is only a starting point, and the possibilities for expansion are endless. We really hope you enjoyed this tutorial!

Apr 2nd 2024 Newhaven Staff

Últimos posts no Blog