Stable 128x64 Pixel FSTN+ Gray Graphic LCD with Blue Backlight
The NHD-C12864A1Z-FSB-FBW-HTT is the perfect solution for presenting information and clean monochrome visuals in your next build. With a 128x64 pixel FSTN+ Gray LCD display, Blue backlight, and a transflective screen, it ensures easy readability across various lighting conditions. Its 6:00 viewing angle can be viewed clearly from multiple positions. The integrated ST7565R controller communicates via a 4-Wire SPI interface, making it easy to integrate into Arduino and similar development board projects.
This display is a chip-on-glass design, which allows you more flexibility in incorporating it into your design because it is not bonded to a PCB. It runs on low 3.0V power for more efficient applications. It operates between -40° and 70° C, making it dependable in extreme conditions, and it is RoHS compliant for environmental safety.
NHD-C12864A1Z-FSB-FBW-HTT: Technical Specifications
| Display Format | 128x64 Pixels |
|---|---|
| Display Type | FSTN (+) Gray |
| Display Mode | Transflective |
| Optimal View | 06:00 |
| Outline L x W x H | 80mm x 54mm x 10.2mm |
| Viewing Area L x W | 70.7mm x 38.8mm |
| Active Area L x W | 66.52mm x 33.24mm |
| Supply Voltage | 3V |
| Backlight | Blue |
| Interface | 4-Wire SPI |
| Compatibility | Arduino and Similar Development Boards |
| Controller Type | ST7565R |
| Connection Type | Two 1x6 Pins with 5.54mm Pitch |
| Operating Temperature | -40° ~ 70° C |
| Storage Temperature | -30° ~ 80° C |
| Additions | Built-in 12V Heater |
1 Revisão
-
helpful resources, very little fuss
I had not tried to get a COG display to work before and so I got this one to try it out. Worked for me with very little fuss. Documentation was spot on and very helpful.
