흰색 백라이트 및 장착 구멍이 있는 밝은 240x64 그래픽 FSTN+ COG LCD
The NHD-C24064WO-ATFH#-3V3 is an easy-to-mount solution with high contrast monochrome graphics and 240x64 pixels. This COG display is a bright FSTN positive (+) transflective display with a white backlight for clarity in any lighting environment. Its 6:00 viewing angle provides optimal visibility from below. The built-in ST7565P controller, selectable Serial or 8-bit 6800/8080 Parallel interface, two 36-pin FFC cables along with the backlight cable connector and attached mounting holes makes integration with Arduino and similar development boards easy.
This display is a chip-on-glass design, which allows you more flexibility in incorporating it into your design because it is not bonded to a PCB. It runs on low 3.3V power for more efficient applications. It operates between -20° and 70° C, making it dependable in extreme conditions, and it is RoHS compliant for environmental safety.
NHD-C24064WO-ATFH#-3V3: 기술 사양
| Display Format | 240x64 Pixels |
|---|---|
| Display Type | FSTN (+) |
| Display Mode | Transflective |
| Optimal View | 6:00 |
| Outline L x W x H | 149.5mm x 51.7mm x 9.8mm |
| Viewing Area L x W | 130.2mm x 37.6mm |
| Active Area L x W | 127.17mm x 33.89mm |
| Supply Voltage | 3.3V |
| Backlight | White |
| Interface | Serial / Parallel |
| Compatibility | Arduino and Similar Development Boards |
| Controller Type | ST7565P |
| Connection Type | 36-Pin FFC with 0.5mm Pitch |
| Operating Temperature | -20° ~ 70° C |
| Storage Temperature | -30° ~ 80° C |
| Additions | Mounting Holes, Backlight Mating Connector |
