null

128x64 Graphic LCD Module / 5.0V FSTN(+) / White Backlight with Negative Voltage

(2 리뷰) 리뷰 작성
$30.29
크기:
128x64 픽셀 해상도
백라이트 색상:
흰색
디스플레이 유형/모드:
FSTN (+) 반투과형
컨트롤러/드라이버:
NT7108C
리소스:
모델:
NHD-12864WG-CTFH-V#N
재고 있음
장바구니에 담기 중… 상품이 장바구니에 추가되었습니다

자주 함께 구매합니다:

Bright 128x64 FSTN(+) Graphic LCD Module with White Backlight and Built-In Negative Voltage

Perfect for your next project, the NHD-12864WG-CTFH-V#N is a bright solution to show high contrast monochrome graphics with 128x64 pixels. This graphic LCD module is a FSTN positive (+) transflective display with a white backlight showing clarity in any lighting environment. Its 6:00 viewing angle provides optimal visibility from below. The built-in NT7108C controller, Parallel interface, and 1x20 thru hole connection makes integration with Arduino and similar development boards quick.

The display runs on 5.0V power with built-in negative voltage supply, making it flexible to work with. It operates between -20° and 70° C, making it dependable in extreme conditions, and it is RoHS compliant for environmental safety.

NHD-12864WG-CTFH-V#N: Technical Specifications

Display Format 128x64 Pixels
Display Type FSTN (+)
Display Mode Transflective
Optimal View 6:00
Outline L x W x H 78mm x 70mm x 14.3mm
Viewing Area L x W 62mm x 44mm
Active Area L x W 56.28mm x 38.36mm
Supply Voltage 5.0V
Backlight White
Interface Parallel
Compatibility Arduino and Similar Development Boards
Controller Type NT7108C
Connection Type 1x20 thru hole with 2.54mm Pitch
Operating Temperature -20° ~ 70° C
Storage Temperature -30° ~ 80° C
Additions Built-in Negative Voltage Supply

2 리뷰

  • 5
    Quality display

    Posted by Saul A on Jun 28th 2024

    The quality of the product is very good, as well as the manufacturing of the soldering for the connection of the Display, however I still cannot give a very complete opinion since these days when I have had the display connected to my motherboard it seems to disconnect very often; I do not know if it is because of the cables, the motherboard or the display. I will replace the cables, if it does not work properly, I will check the motherboard and if it still does not work properly, I will assume it is the display.

  • 5
    easy setup

    Posted by Mr. X on Apr 25th 2023

    Ordered with pin header soldered. Setup was a breeze!

조립은 저희에게 맡겨주세요

저희의 모든 부가 서비스를 확인하고, 저희가 어떻게 도움을 드릴 수 있는지 자세히 알아보세요.

맞춤형 제안 보기

로그인