Modify Your Display
Benutzerdefinierte Hintergrundbeleuchtung
Customize voltage, current, brightness, or LED color, including NVIS options. We can also modify the assembly type, such as switching from array to side-lit LEDs.
Montage von Add-Ons
Add bezels, gaskets, custom enclosures, metal brackets, threaded standoffs, or pressure-sensitive adhesive (PSA) to support your display's integration.
Deckglaszusätze
Enhance durability with custom-cut cover glass. Choose from various thicknesses and add optical bonding for protection against moisture and debris.
Cable Modifications
Tailor cable length, layout, shielding, or connectors to fit tight spaces, reduce noise, and support reliable signal transmission.
Touchscreen Integrations
Add capacitive or resistive touchscreens with custom layouts, bonding, and cable routing for seamless control.
Schnittstellen-Optionen
Customize display interfaces to align with your system's specs, including support for LCD, OLED, and touchscreen technologies.
Connector Solutions
Choose from FFC, pin header, or custom connectors with matched pinouts and built-in cable or EMI support.
PCB Adaptations
Design PCBs to match your display's shape, layout, and function. Add features like silkscreen, coating, or custom finishes.
Optical Bonding Enhancements
Increase readability and durability with full or perimeter bonding that cuts glare and boosts outdoor visibility.
Custom OLEDs & LCDs
Build an OLED or LCD display to your exact needs, including size, brightness, interface, touch, and more.
Start Your Custom Display Project
Kabel
Off-the-shelf cables don't always align with the needs of your application, especially in tight spaces or demanding environments. Our custom cable options ensure a perfect fit, supporting unique signal, interface, and installation requirements across industries like medical, industrial, automotive, and consumer electronics.
Engineered for Performance and Reliability
We offer a wide range of cable customization options: length, pinout, shielding, jacketing, connector type, gauge, and more. Whether you need resistance to EMI, UV, chemicals, or physical stress, our cables are built to withstand harsh conditions and ensure strong, reliable signal transmission over time.
Built for Integration
From flat flexible cables (FFC/FPC) to IDC ribbon cables, we tailor each solution for optimal layout, durability, and ease of installation. Add features like strain relief, right-angle connectors, or color coding to streamline assembly and reduce failure points. Whatever your challenge, we'll create a cable that fits your display and design perfectly.
Touchscreens
Touchscreens have changed the way we interact with displays by providing intuitive control through either capacitive (PCAP) or resistive technology. At Newhaven Display, we offer both standard and fully customized touchscreen solutions for TFT, IPS, and OLED displays. Our team works closely with you to align each design with your specific needs.
Tailored Touch Solutions for Any Application
Our in-house engineers can customize the sensor glass, cover glass, cable layout, bonding method, and more. We support projects across a wide range of industries, including medical, industrial, automotive, marine, and consumer electronics. Each touchscreen is built for long-term reliability and seamless integration into your product.
Capacitive and Resistive Touchscreen Options
Capacitive touchscreens support multi-touch functionality, fast response times, and clear image quality, making them ideal for advanced user interfaces. Resistive touchscreens are well-suited for environments that require glove or stylus input and offer strong resistance to moisture, dust, and accidental activation. We help guide you to the best choice based on your design and usage requirements.
Steckverbinder
Connectors are essential for powering and communicating with LCD and OLED displays. We offer a variety of standard options, including pin headers, FFC/FPC connectors, and backlight connectors, as well as fully customized solutions to meet all your unique project requirements.
FFC, Pin Header, and Backlight Connectors
FFC connectors provide reliable connections for flat flexible cables, while pin headers connect display modules to PCBs in single or dual row configurations. Backlight connectors handle power and control signals for LCD illumination. Each connector can be tailored in size, pin count, and layout for optimal integration.
Expert Support and Customization Services
Our engineers work with you to design connectors that meet your system needs, including pinout matching, cable modifications, and EMI shielding. Custom connectors, soldering, and assembly can be added as services, with clear estimates for MOQ and NRE provided upfront.
Interfaces
We design and develop custom LCD and OLED display interfaces tailored to your project's technical requirements. Our engineering team ensures seamless communication between display and system for reliable performance and easy integration.
Flexible Display, Touchscreen, and Interface Options
Choose from LCD, OLED, TFT, and IPS displays in a variety of sizes, with support for both capacitive and resistive touchscreens. We offer a wide selection of communication interfaces, including Parallel, Serial (SPI, I²C, RS232/TTL), RGB, LVDS, HDMI, USB, VGA, and MIPI DSI with each optimized for different design needs.
Tailored Integration and Support
Our displays can be configured with user-selectable or software-defined interfaces, and we also provide custom PCB design for predefined connections. From concept to production, our engineers collaborate with your team to deliver a display solution that fits your system and accelerates development.
PCBs
We offer full PCB customization to support the size, layout, and functionality of your LCD or OLED display. Whether you need changes to shape, mounting, component layout, or electrical interfaces, we help ensure the PCB fits your product's exact requirements.
Seamless Integration
Customize key features such as board thickness, layer count, solder mask color, and surface finish. We also support silkscreen printing, conformal coating, and a range of connection types to meet both technical and aesthetic goals. Every design is optimized for space efficiency, reliability, and assembly ease.
Performance and Compatibility
Our custom PCBs integrate the necessary drivers, controllers, and connectors to streamline your display's operation. We work with you to align the layout with your system's architecture, reduce interference, and protect components—resulting in a display module that's ready for real-world use.
Deckglas
We offer a wide range of cover glass options designed to enhance durability, clarity, and functionality for LCD and OLED displays. From custom shapes and sizes to full-color graphics, our team can manufacture cover glass tailored to your design, branding, and environmental requirements.
Enhanced Performance and Protection
Choose from features like anti-reflective, anti-glare, and anti-fingerprint coatings to improve visibility and reduce smudging. Glass thickness, edging, and cutouts can be precisely engineered for sensors, touch icons, and enclosures, giving you a perfect fit and finish.
Materials and Manufacturing Capabilities
Our capabilities include soda-lime, Gorilla, sapphire, and chemically strengthened glass, each offering different levels of strength and optical clarity. Whether you need extended glass, printed branding, or integrated touch support, we help you build a display that looks and performs exactly as intended.
Mounting
Our custom mounting options are built to ensure secure, seamless integration of your LCD or OLED display into your final product. From structural support to visual polish, we provide tailored solutions that match your technical and design needs.
Versatile Components and Configurations
Available options include metal brackets, custom enclosures, bezels, gaskets, adhesives, and threaded standoffs. Each component is engineered for strength, precision fit, and compatibility with your display and housing.
Materials That Match Performance Needs
Choose from materials like powder-coated steel, stainless steel, SGLCC, and anodized aluminum, each offering unique advantages in strength, appearance, and environmental resistance. We'll help identify the right configuration to match your application and performance goals.
Backlights
We design custom backlighting to optimize visibility, power efficiency, and performance in any environment. Whether you need a specific brightness level, color setup, or NVIS compatibility, our backlight options are engineered to meet your exact requirements.
Color Control and Power Optimization
Choose from single, tricolor, or full RGB configurations, along with brightness control for ideal readability in both low light and sunlight. Built-in current-limiting and power management options ensure safe operation and long-term reliability.
Assembly Configurations and NVIS Support
Backlights can be assembled using array or side LED configurations to suit your design. For military or aerospace projects, we offer NVIS integration for compatibility with night vision equipment without compromising display clarity.
Optisches Bonding
Optical bonding improves display visibility and strength by removing the air gap between the display and cover glass. This reduces glare, boosts contrast, and eliminates internal reflections. It's ideal for environments that demand high durability and readability, from marine to medical and industrial applications.
Full-Surface and Perimeter Bonding Options
We offer both full optical bonding and perimeter bonding methods depending on your performance and budget needs. Full bonding enhances clarity and shock resistance, while perimeter bonding provides moisture and dust protection without full-surface adhesive.
Built for Demanding Environments
Bonded displays offer improved resistance to shock, condensation, and vibration while supporting advanced coatings like anti-glare and anti-fingerprint. Whether you need improved readability outdoors or enhanced durability in rugged conditions, our bonding solutions deliver consistent results tailored to your project.
Custom OLEDs & LCDs
Design fully customized displays with the performance, appearance, and integration features you need. From interface options and power requirements to physical size, backlight, and viewing angle, our display customizations are engineered to support your product's exact needs.
Custom LCD Displays
We offer extensive customization capabilities across a wide range of LCD technologies, including TFT, IPS, character, graphic, segment, and COG displays. LCDs can be modified with features such as custom interfaces, display sizes, brightness levels, touchscreens, cover glass, and mounting options. Whether you're starting with an existing part or building from the ground up, we tailor the display to meet your application's electrical and mechanical requirements.
Kundenspezifische OLED-Displays
Our OLED customizations focus on high-contrast, energy-efficient solutions with long operational life and crisp visibility. Choose from character or graphic OLEDs with custom interface types, pinouts, display formats, and assembly configurations. OLED displays can also be customized with different connector types, backlight colors, and mechanical features for improved integration and performance in your end product.
A Transparent, Turn-Key Process
Our custom display process is built for clarity and speed: we define your project scope, design and prototype the display, verify it with you, and move to production. Every quote includes clear MOQ and NRE info upfront, with no hidden costs. With local warehousing and U.S. support, we deliver on time and on spec.
Discuss project needs, receive a no-obligation quote, and get a sample PO.
Engineers design and create a prototype and collaborate with you until your approval.
Samples are validated and shipped for your approval. Then We finalize design and send to production.
We'll coordinate a production schedule, submit a PO, and deliver the shipment to you.
Custom Solutions FAQ
What type of custom display solutions does Newhaven Display offer?
Our custom solution capabilities include cable and connector customizations, touchscreen and cover glass add-ons, interface customizations, PCB modifications, mounting hardware, custom backlights, and keypads.
Is it possible to add touchscreen capabilities to displays?
Yes, we can add a capacitive or resistive touchscreen to our displays.
How does Newhaven Display ensure the products meet industry quality standards?
All Newhaven Display facilities are ISO certified. Our facility certifications include ISO 9001:2015, ISO 14001, ISO 13485, and TS-16949. All of our products are RoHS compliant, REACH compliant, and conflict free. Specific quality testing procedures are listed at https://newhavendisplay.com/quality/.
What kind of support does Newhaven Display provide for customers working on custom projects?
Newhaven Display will be happy to provide technical support throughout the lifetime of the custom project. You can contact a Newhaven Display engineer any time by emailing nhtech@newhavendisplay.com.
What is the process for starting a custom display project with Newhaven Display?
Please submit the details of your custom display project at https://newhavendisplay.com/custom-solutions/#cs-form
Are there minimum order quantities (MOQ) for custom solutions?
A minimum order quantity requirement will apply for the majority of our custom solutions. The MOQ depends on the complexity of the project. We will advise the MOQ requirement after receiving your project details.
Can the sample lead times be reduced? If so, what is the protocol?
In some cases, we offer expedited options to reduce the sample and production lead times. Please email customer.service@newhavendisplay.com with your delivery requirements.
Can Newhaven Display incorporate specific interfaces into custom designs?
Some of our displays can be customized with a different interface. Please send the part number and desired interface to nhtech@newhavendisplay.com.
Can Newhaven Display do customization on cover glass with or without bonding?
Yes, we can perform cover glass customizations. The cover glass can be bonded using VHB tape or with optically clear adhesive (OCA).
Does Newhaven Display provide support for integrating custom displays into existing systems, including technical guidance and driver availability?
We will be happy to provide technical assistance with integrating the custom display into an existing system. Please reach out to nhtech@newhavendisplay.com.
Can you match the pinout of my existing display?
This is on a case-by-case basis. Please send the pinout or datasheet of your existing display to nhtech@newhavendisplay.com and we will let you know if we can provide a match.
Can you add EMI shielding to the display?
Yes, we offer customized options such as adding EMI filters within the circuit design, adding EMI shielding to the FPC cable and adding an ITO-based EMI shield in front of the display. Please email nhtech@newhavendisplay.com to discuss your requirements.
Can you add our company logo to the cover glass/touch panel?
Yes, we can add your company logo. Please send logo artwork to nhtech@newhavendisplay.com.
Can you supply the display in an IP-rated enclosure?
We can supply display enclosures, but we do not certify our products for IP-ratings.
Can you add a gasket to the display?
Yes, most of our displays can have foam or rubber gasket added.
Can you change the size of the FPC/FFC?
Yes, we can modify the length, width, and pitch of the FPC/FFC.
Can the touchscreen / cover glass extend beyond the dimensions of the display?
Yes, we can extend the touchscreen or cover glass beyond the dimensions of the display. Please send a 3D drawing with your required dimensions to nhtech@newhavendisplay.com.
Can we add cover glass on resistive touchscreen displays?
We cannot add a cover glass in front of a resistive touchscreen since a resistive touch panel must be pressed for a touch event. Adding a cover glass in front of a resistive touchscreen would prevent the touch panel from being pressed.
Can we add a cover glass on capacitive touchscreen displays?
Our standard capacitive touchscreen displays already have an integrated 0.7mm thick chemically strengthened cover glass. We can provide thicker cover glass customizations upon request.
Can the user interface connectors on the HDMI PCBs be changed to a different style or orientation?
Yes, it is possible to change the connectors, but this may require a PCB redesign.
Is it possible to get the mounting bracket with mounting flanges on the longer side of the display?
Yes, it is possible to have mounting flanges on different locations on the mounting bracket as a custom solution.
Do you sell the mounting bracket by itself?
We do not sell the mounting bracket by itself. You would need to purchase the display with the mounting bracket attached.
Can we get a display with an operating temperature range of -40°C to 85°C?
Yes, we can customize the display with a heater panel and use higher grade materials to achieve a wider temperature range.
Can we increase the sensitivity of a capacitive touchscreen display?
The capacitive touch panel sensitivity is configured during our manufacturing process. If sensitivity modification is required for an application, this must be done during manufacturing as a custom part.
Can we power the HDMI display using the USB port?
Depending on the display model, we can configure the module to have power over USB.
What is the longest Flex cable you can offer for TFT displays?
We typically recommend keeping the cable length no longer than 6 inches to reduce risk of RFI/EMI on signal integrity.
Can we get the displays with Optical bonding?
Yes, we can provide the display with optical bonding. Our NHD-4.3-800480EZ-ASXP-CTP is a standard off-the-shelf display with an optically bonded capacitive touchscreen.
Can you match the pinout of my existing display?
This is on a case-by-case basis. Please send the pinout or datasheet of your existing display to nhtech@newhavendisplay.com and we will let you know if we can provide a match.
Can you provide mounting hardware for the display? (applies to COGs)
Mounting solutions are specifically designed based on the display model and customer requirements. Please email nhtech@newhavendisplay.com to discuss further.
Can you change the backlight color of an LCD?
Yes, we can change the backlight color to white, blue, green, red, or yellow. We can also change to an RGB backlight to create a wide range of colors.
Can you add EMI shielding to the flex cable?
Yes, our display flex cables can be modified with EMI shielding.
Can you provide the display in an IP-rated enclosure?
We can supply display enclosures, but we do not certify our products for IP-ratings.
Can you change the size of the FPC/FFC?
Yes, we can modify the length, width, and pitch of the FPC/FFC.
Can you make custom segment LCDs?
Yes. Please email nhtech@newhavendisplay.com to share your segment display requirements.
Can we get a display with an operating temperature range of -40°C to 85°C?
Yes, we can customize the display with a heater panel and use higher grade materials to achieve a wider temperature range.
Can you add conformal coating on the display?
Yes, we can add conformal coating to the display. We can add this on some or all components, as requested by the customer.
Can the display come with a custom connector?
Yes, we can add a custom connector to the display if our standard pin header is not suitable for your application. Please send the connector part number to nhtech@newhavendisplay.com.
Can we get the character LCD with different font table?
Yes, we can produce the display with a different font table if the built-in driver IC supports the requested font. Please reach out to nhtech@newhavendisplay.com for more details.
Can you match the pinout of my existing display?
This is on a case-by-case basis. Please send the pinout or datasheet of your existing display to nhtech@newhavendisplay.com and we will let you know if we can provide a match.
Can you provide mounting hardware for the display?
Mounting solutions are specifically designed based on the display model and customer requirements. Please email nhtech@newhavendisplay.com to discuss further.
Can you offer the display in a different color?
This is on a case-by-case basis. Please email the part number and desired color to nhtech@newhavendisplay.com.
Can you provide the display in an IP-rated enclosure?
We can supply display enclosures, but we do not certify our products for IP-ratings.
Can the touchscreen / cover glass extend beyond the dimensions of the display?
Yes, we can extend the touchscreen or cover glass beyond the dimensions of the display. Please send a 3D drawing with your required dimensions to nhtech@newhavendisplay.com.
Can we get an OLED display with touchscreen add-ons?
We can provide touchscreen add-ons for OLEDs depending on the size of the display. We currently offer our 2.7" OLED displays with capacitive touchscreen which you can use as a reference.
Can we add conformal coating on the display?
Yes, we can add conformal coating to the display. We can add this on some or all components, as requested by the customer.
Can the display come with a custom connector?
Yes, we can add a custom connector to the display if our standard pin header is not suitable for your application. Please send the connector part number to nhtech@newhavendisplay.com.
Can you match the pinout of my existing display?
This is on a case-by-case basis. Please send the pinout or datasheet of your existing display to nhtech@newhavendisplay.com and we will let you know if we can provide a match.
Can you change the size of the FPC/FFC?
Yes, we can modify the length, width, and pitch of the FPC/FFC.
What is the longest Flex cable you can offer for TFT displays?
We typically recommend keeping the cable length no longer than 6 inches to reduce risk of RFI/EMI on signal integrity.
Can you add EMI shielding to the flex cable?
Yes, our display flex cables can be modified with EMI shielding.
Can the display come with a custom connector?
Yes, we can add a custom connector to the display if our standard pin header is not suitable for your application. Please send the connector part number to nhtech@newhavendisplay.com.
Can you add our company logo to the cover glass / touch panel?
Yes, we can add your company logo. Please send artwork to nhtech@newhavendisplay.com
Can the touchscreen / cover glass extend beyond the display dimensions?
Yes, we can extend the touchscreen or cover glass beyond the dimensions of the display. Please send a 3D drawing with your required dimensions to nhtech@newhavendisplay.com
Can we add cover glass on resistive touchscreen displays?
We cannot add cover glass in front of a resistive touchscreen since these touchscreens must be pressed for a touch event to occur. Adding cover glass in front of a resistive touchscreen prevents the touch panel from being pressed.
Can we add cover glass to capacitive touchscreen displays?
Our standard capacitive touchscreen displays already have an integrated 0.7mm thick, chemically strengthened cover glass applied. We can provide thicker cover glass customizations upon request.
Can we increase the sensitivity of a capacitive touchscreen display?
The capacitive touch panel sensitivity is configured during our manufacturing process. If sensitivity modification is required for an application, this must be done during the manufacturing as a custom part.
Can we get displays with Optical bonding?
Yes, we can provide the display with optical bonding. Our NHD-4.3-800480EZ-ASXP-CTP is a standard off-the-shelf display with an optically bonded capacitive touchscreen.
Can we get an OLED display with a touchscreen?
Yes, we can provide touchscreen add-ons for OLED displays depending on the size of the display. We currently offer our 2.7" graphic OLEDs with capacitive touch which you can reference.
What communication interface options do you offer?
We can integrate parallel and serial interfaces, including SPI, I2C, RS232 TTL, USB, HDMI, RGB, VGA, MIPI DSI, LVDS, and more.
Can the user interface connectors on the HDMI PCBs be changed to a different style or orientation?
Yes, it is possible to change the connectors, but this may require a PCB redesign.
Can we power the HDMI display using the USB port?
Depending on the display model, we can configure the module to have power over USB.
Can you match the pinout of my existing display?
This is on a case-by-case basis. Please send the pinout or datasheet of your existing display to nhtech@newhavendisplay.com and we will let you know if we can provide a match.
Can you add EMI shielding to the display?
Yes, we offer customized options such as adding EMI filters within the circuit design, adding EMI shielding to the FPC cable and adding an ITO-based EMI shield in front of the display. Please email nhtech@newhavendisplay.com to discuss your requirements.
Can we get a display with an operating temperature range of -40°C to 85°C?
Yes, we can customize the display with a heater panel and use higher grade materials to achieve a wider temperature range.
Can the display come with a custom connector?
Yes, we can add a custom connector to the display if our standard pin header is not suitable for your application. Please send the connector part number to nhtech@newhavendisplay.com.
Is it possible to add more than one communication interface to a display?
Yes, more than one interface can be added to a display. In fact, many of our displays support multiple communication interfaces. To find out which interfaces are compatible with a specific product, you can review its datasheet or speak with one of our engineers to learn more about the options available to you.
Can the display panel and the touchscreen panel have different communication interfaces?
Yes, the display panel and the touchscreen panel can indeed have different communication interfaces.
Can you match the pinout of my existing display?
This is on a case-by-case basis. Please send the pinout or datasheet of your existing display to nhtech@newhavendisplay.com and we will let you know if we can provide a match.
Can you change the size of the FPC/FFC?
Yes, we can modify the length, width, and pitch of the FPC/FFC.
What is the longest Flex cable you can offer for TFT displays?
We typically recommend keeping the cable length no longer than 6 inches to reduce risk of RFI/EMI on signal integrity.
Can you add EMI shielding to the flex cable?
Yes, our display flex cables can be modified with EMI shielding.
Can the display come with a custom connector?
Yes, we can add a custom connector to the display if our standard pin header is not suitable for your application. Please send the connector part number to nhtech@newhavendisplay.com.
Can the user interface connectors on the HDMI PCBs be changed to a different style or orientation?
Yes, it is possible to change the connectors, but this may require a PCB redesign.
Can we power the HDMI display using the USB port?
Depending on the display model, we can configure the module to have power over USB.
Can you add EMI shielding to the display?
Yes, we offer customized options such as adding EMI filters within the circuit design, adding EMI shielding to the FPC cable, and adding an ITO-based EMI shield in front of the display. Please email nhtech@newhavendisplay.com to discuss your requirements.
Can you supply the display in an IP-rated enclosure?
We can supply display enclosures, but we do not certify our products for IP ratings.
Can you add a gasket to the display?
Yes, most of our displays can have foam or rubber gaskets added.
Can conformal coating be added on the back of the LCD display?
Yes, we can add conformal coating to the display. We can add this on some or all components, as requested by the customer.
Can you provide mounting hardware for the display?
Mounting solutions are specifically designed based on the display model and customer requirements. Please email nhtech@newhavendisplay.com to discuss further.
Can we get a display with an operating temperature range of -40°C to 85°C?
Yes, we can customize the display with a heater panel and use higher grade materials to achieve a wider temperature range.
Can the cover glass extend beyond the dimensions of the display?
Yes, we can extend the touchscreen or cover glass beyond the dimensions of the display. Please send a 3D drawing with your required dimensions to nhtech@newhavendisplay.com
Can we add cover glass on resistive touchscreen displays?
We cannot add a cover glass in front of a resistive touchscreen since a resistive touch panel must be pressed for a touch event. Adding a cover glass in front of a resistive touchscreen would prevent the touch panel from being pressed.
Can we add a cover glass on capacitive touchscreen displays?
Our standard capacitive touchscreen displays already have an integrated 0.7mm thick chemically strengthened cover glass. We can provide thicker cover glass customizations upon request.
Can you add our company logo to the cover glass/touch panel?
Yes, we can add your company logo. Please send logo artwork to nhtech@newhavendisplay.com.
Can we get the displays with Optical bonding?
Yes, we can provide the display with optical bonding. Our NHD-4.3-800480EZ-ASXP-CTP product is a standard off-the-shelf display with an optically bonded capacitive touchscreen.
Can you supply the display in an IP-rated enclosure?
We can supply display enclosures, but we do not certify our products for IP-ratings.
Can you add a gasket to the display?
Yes, most of our displays can have foam or rubber gasket added.
Is it possible to get the mounting bracket with mounting flanges on the longer side of the display?
Yes, it is possible to have mounting flanges on different location on the mounting bracket as a custom solution.
Do you sell the mounting bracket by itself?
We do not sell the mounting bracket by itself. You would need to purchase the display with the mounting bracket attached.
Can you provide mounting hardware for the display?
Mounting solutions are specifically designed based on the display model and customer requirements. Please email nhtech@newhavendisplay.com to discuss further.
Can you add conformal coating on the display?
Yes, we can add conformal coating to the display. We can add this on some or all components, as requested by the customer.
Didn't Find What Your Looking For?
Reach Out To Our Engineers