Customizable 128x64 Graphic COG LCD FSTN (+) Display with RGB Backlight
The NHD-C12864DA-FSRGB-FBW-3V3 is exactly what you need to show monochrome graphics with a customizable color backlight in your next project. This COG display includes 128x64 pixels, FSTN positive (+) transflective with RGB backlight. Red, green, and blue LEDs work in tandem to allow for a wide range of custom color options to suit any project and aesthetic. Its 6:00 viewing angle provides optimal visibility from below. The built-in ST7565R controller, selectable 4-Wire SPI or 8-bit 6800/8080 Parallel interface, and 1x28 pin header to quickly solder directly into PCB, makes integration with Arduino and similar development boards easy.
This graphic display is a chip-on-glass design, which allows you more flexibility in incorporating it into your design because it is not bonded to a PCB. It runs on a low 3.0V power supply voltage, making it easy to work with. It operates between -20° and 70° C, making it dependable in extreme conditions, and it is RoHS compliant for environmental safety.
NHD-C12864DA-FSRGB-FBW-3V3: Technical Specifications
| Display Format | 128x64 Pixels |
|---|---|
| Display Type | FSTN (+) |
| Display Mode | Transflective |
| Optimal View | 6:00 |
| Outline L x W x H | 58.2mm x 14.7mm x 5.7mm |
| Viewing Area L x W | 50mm x 25mm |
| Active Area L x W | 46.05mm x 23.01mm |
| Supply Voltage | 3.0V |
| Backlight | RGB |
| Interface | Serial / Parallel |
| Compatibility | Arduino and Similar Development Boards |
| Controller Type | ST7565R |
| Connection Type | 1x28 Pins with 1.27mm Pitch |
| Operating Temperature | -20° ~ 70° C |
| Storage Temperature | -30° ~ 80° C |
